🍼 Room for BabyOpen the planner

Graco Benton crib dimensions: will it fit your nursery?

Short answer: the Graco Benton 5-in-1 crib is 56¾" long, 29¾" wide and 41¾" tall (56.73" × 29.72" × 41.68", from the maker's listing) and takes a standard 28" × 52" crib mattress. It uses about 11.7 sq ft of floor. It's a normal width but about 3" longer than most full-size cribs, so measure the wall you want it on. It fits a 9x10 nursery with a glider and a 3-drawer dresser.

Graco Benton measurements

MeasurementBenton 5-in-1
Length (outside)56¾" (56.73")
Width (outside)29¾" (29.72")
Height (tallest end)41¾" (41.68")
MattressStandard full-size crib mattress, about 28" × 52" (sold separately)
Mattress heights4
Weight42 lb
Floor areaabout 11.7 sq ft

Graco cribs are made by Storkcraft, and these numbers are from Storkcraft's Benton page (checked October 2026; Walmart lists the same size). Storkcraft calls the long side "width" and the short side "depth". There's also a Benton with Drawer version with a pull-out drawer underneath; check that listing for its size, and leave about 20" in front of the crib so the drawer can open.

How it compares, drawn to scale

Graco Benton56¾" × 29¾"IKEA Gulliver53⅞" × 29½"Babyletto Hudson53¾" × 29¾"DaVinci Kalani54½" × 35"
Floor footprints at the same scale, with lines every 12". The Benton is about as wide as the IKEA Gulliver and Babyletto Hudson but about 3" longer. The DaVinci Kalani is shorter but about 5" wider.

The extra length matters most when the crib goes between a corner and a door or closet, or on a short wall under a window. A 9 ft (108") wall fits it with about 51" to spare. If you're squeezing it into a nook, compare it with the IKEA Gulliver (53⅞") or the Babyletto Hudson (53¾"). For a wider crib, see the DaVinci Kalani.

A 9x10 nursery with a Benton

windowdoor swingGlider36"drawerspace3-drawer 42½"Benton 56¾" × 29¾"77½" open floor9 ft × 10 ft (108" × 120"), drawn to scale
Benton on the left wall near the door end, away from the window. A glider sits in the top-left corner, and a 42½" 3-drawer dresser is on the right wall with 36" of drawer space in front. The door swing stays clear. Scale: 1 ft = 48 px.

Across from the crib there's about 77½" of open floor to the right wall (108" − 29¾" crib − ¾" off the wall), enough for a play mat. Keep the crib out of the door swing: with the door in the corner, the crib's foot ends about 1" from the bottom wall, and the door opens into the floor beside it, not into the crib.

Want a 6-drawer dresser? In a 9x10, a 60" 6-drawer usually fits only on the window wall or across from the crib. Try it in the planner before you buy; it's easier than measuring three ways on paper.

Type in your room's size, add a crib at 56¾" × 29¾", and drag it around your real walls, door and window.

Try it with your room, free →

What fits around a Benton

RoomWhat fits with a Benton
8x10Crib + a 3-drawer dresser, or crib + a small glider. See 8x10 layouts.
9x9 / 9x10Crib, a 3-drawer dresser and a glider (above). See 9x9 and 9x10 layouts.
10x10Crib, 6-drawer dresser and glider. See crib in a 10x10.
10x11 and upEverything above plus a play mat. See 10x11 and 11x11 layouts.

Plan for the conversions

The "5-in-1" means it turns into a toddler bed (guardrail kit sold separately), a daybed, and a full-size bed with a headboard, with or without a footboard (conversion kit sold separately). The toddler bed and daybed stay on the crib's footprint. The full-size bed is much bigger: a full mattress alone is 54" × 75". Graco says to stop using it as a crib once your child can climb out or is taller than 35".

Before you buy

  1. Measure your room wall to wall, plus the door swing, window and closet. Our measuring guide has a checklist.
  2. Pick a mattress that fits snugly: a standard crib mattress (about 28" × 52"), no more than 6" thick. You shouldn't be able to fit two fingers between the mattress and the crib side.
  3. Plan where it goes before assembly. Our space around a crib cheat sheet has the clearances.
Follow the assembly instructions, lower the mattress once your baby can sit or pull up, and keep the crib away from windows and cords. The AAP's safe-sleep guidance is a firm, flat mattress and fitted sheet with nothing else in the crib.

Comparing other furniture? See our nursery furniture dimensions cheat sheet and the full-size vs mini crib guide.

Common questions

What are the Graco Benton crib dimensions?

The Graco Benton 5-in-1 is 56.73" long, 29.72" wide and 41.68" tall (about 56¾" × 29¾" × 41¾") and weighs 42 lb, per the maker's listing.

Is the Graco Benton bigger than other cribs?

It's about 3" longer than most full-size cribs (many are around 54"), but the same width, about 29¾".

What size mattress fits the Graco Benton?

A standard full-size crib mattress (about 28" × 52"), no thicker than 6", that fits snugly. The mattress is sold separately.

Will a Graco Benton fit in a 9x10 nursery?

Yes. On a 10 ft wall it leaves room for a glider in the corner, and a 3-drawer dresser fits on the opposite wall with 36" of drawer space.