| Measurement | Inches | Centimeters |
|---|---|---|
| Outside length | 53.75" | 136.5 cm |
| Outside width (depth from wall) | 29.75" | 75.6 cm |
| Height (front rail to floor) | 35" | 88.9 cm |
| Inside (mattress area) | 52" × 28" | 132 × 71 cm |
| Floor footprint | about 11.1 sq ft (1.03 m²) | |
| Assembled weight | 54 lb (24.5 kg) | |
Source: Babyletto's product page for the Hudson 3-in-1 Convertible Crib with Toddler Bed Conversion Kit. Round up by half an inch when you plan, since walls and baseboards are rarely perfectly square.
It takes a standard full-size crib mattress (52" × 28" inside). Because the frame adds under 2" in each direction, the Hudson is a little smaller than many convertible cribs, which often run 55–58" long once you count chunkier posts or a fixed headboard.
On a 120" wall, the 53.75" crib leaves about 66" free, so you could even fit a 3-drawer dresser beside it instead. With a dresser opposite, the floor between the crib and the dresser's drawer zone is about 33", so you can walk between them even with drawers open. The crib wall has no window, and the glider is clear of the door swing.
Add a 53.75" × 29.75" crib to your own room and see exactly where it fits next to your dresser, door and window.
Try it with your room, free →The Hudson converts to a toddler bed (the conversion kit comes in the box) and a daybed. The frame stays the same size, so you don't need to change the layout when it converts. It moves to the toddler bed stage with a guardrail on one side; plan that open side away from the door, so it isn't the first thing your toddler walks into.
More: will a crib fit in a 10x10 room, small nursery layout ideas, IKEA Hemnes 8-drawer dresser in a nursery. Looking at IKEA? See IKEA Gulliver crib dimensions.
53.75" long, 29.75" wide and 35" tall assembled, with a 52" × 28" inside area for a standard crib mattress (Babyletto's listed specs).
Usually, yes. It needs about 54" of wall and 30" out from the wall, plus a walkway. It fits comfortably in 9x10 and 10x10 rooms, and in many 8x9 rooms with a smaller dresser.
No. It takes a standard full-size crib mattress, which fits the 52" × 28" interior.
No. The frame keeps the same footprint as a toddler bed and daybed, so your layout can stay the same.
Plan on 24–30" of clear floor along the open side to walk and lift your baby, keep it away from windows and cords, and keep 36" in front of any dresser so drawers can open.